// You will need to install RP2040_PWM in the Arduino IDE first!


#define F_CPU 204000000


#include "RP2040_PWM.h"
#include "hardware/pll.h"
#include "hardware/clocks.h"

//////////////////////////////////// begin clock code
#include "hardware/pll.h"
#include "hardware/clocks.h"

void set_sys_clock_pll(uint32_t vco_freq, uint post_div1, uint post_div2) {
  if (!running_on_fpga()) {
    clock_configure(clk_sys,
                    CLOCKS_CLK_SYS_CTRL_SRC_VALUE_CLKSRC_CLK_SYS_AUX,
                    CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB,
                    48 * MHZ,
                    48 * MHZ);

    pll_init(pll_sys, 1, vco_freq, post_div1, post_div2);
    uint32_t freq = vco_freq / (post_div1 * post_div2);

    // Configure clocks
    // CLK_REF = XOSC (12MHz) / 1 = 12MHz
    clock_configure(clk_ref,
                    CLOCKS_CLK_REF_CTRL_SRC_VALUE_XOSC_CLKSRC,
                    0,  // No aux mux
                    12 * MHZ,
                    12 * MHZ);

    // CLK SYS = PLL SYS (125MHz) / 1 = 125MHz
    clock_configure(clk_sys,
                    CLOCKS_CLK_SYS_CTRL_SRC_VALUE_CLKSRC_CLK_SYS_AUX,
                    CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS,
                    freq, freq);

    clock_configure(clk_peri,
                    0,  // Only AUX mux on ADC
                    CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB,
                    48 * MHZ,
                    48 * MHZ);
  }
}
bool check_sys_clock_khz(uint32_t freq_khz, uint *vco_out, uint *postdiv1_out, uint *postdiv_out) {
  uint crystal_freq_khz = clock_get_hz(clk_ref) / 1000;
  for (uint fbdiv = 320; fbdiv >= 16; fbdiv--) {
    uint vco = fbdiv * crystal_freq_khz;
    if (vco < 400000 || vco > 1600000) continue;
    for (uint postdiv1 = 7; postdiv1 >= 1; postdiv1--) {
      for (uint postdiv2 = postdiv1; postdiv2 >= 1; postdiv2--) {
        uint out = vco / (postdiv1 * postdiv2);
        if (out == freq_khz && !(vco % (postdiv1 * postdiv2))) {
          *vco_out = vco * 1000;
          *postdiv1_out = postdiv1;
          *postdiv_out = postdiv2;
          return true;
        }
      }
    }
  }
  return false;
}
static inline bool set_sys_clock_khz(uint32_t freq_khz, bool required) {
  uint vco, postdiv1, postdiv2;
  if (check_sys_clock_khz(freq_khz, &vco, &postdiv1, &postdiv2)) {
    set_sys_clock_pll(vco, postdiv1, postdiv2);
    return true;
  } else if (required) {
    panic("System clock of %u kHz cannot be exactly achieved", freq_khz);
  }
  return false;
}
//////////////////////////////////// end clock code

RP2040_PWM* pwm;
RP2040_PWM* led;

void setup() {
  Serial.begin(9600);
  set_sys_clock_khz(204000, true);
  pwm = new RP2040_PWM(15, 1557000, 0);
  pwm->enablePWM();
  uint16_t PWM_TOP   = pwm->get_TOP();
  uint16_t PWM_DIV   = pwm->get_DIV();
  uint16_t PWM_Level = 0;
  // setPWM_manual(uint8_t pin, uint16_t top, uint8_t div, uint16_t level, bool phaseCorrect = false)
  pwm->setPWM_manual(15, PWM_TOP, PWM_DIV, PWM_Level, true);
  led = new RP2040_PWM(LED_BUILTIN, 1557000, 100);
  led->enablePWM();
  PWM_TOP   = led->get_TOP();
  PWM_DIV   = led->get_DIV();
  PWM_Level = 65535;
  // setPWM_manual(uint8_t pin, uint16_t top, uint8_t div, uint16_t level, bool phaseCorrect = false)
  led->setPWM_manual(LED_BUILTIN, PWM_TOP, PWM_DIV, PWM_Level, false);
  Serial.println(pwm->get_freq_CPU());
  Serial.println(pwm->getActualFreq());
  delay(200);
}

//long n = 0;
//float m = 0;

void loop() {
  float v = ((float) analogRead(26) / 4096.0 * 7 * 100.0); 
  pwm->setPWM_DCPercentage_manual(15, v);
  v *= 2;
  led->setPWM_DCPercentage_manual(LED_BUILTIN, v);
  //n = n + 1;
  //if(m < v) { m = v; }
  //if(n % 100000 == 0) {
    //Serial.print(n);
    //Serial.println(": ");
    //Serial.println(m);
    //m = 0;
  //}
}