- It was noticed [in the Forgejo matrix channel](https://matrix.to/#/!qjPHwFPdxhpLkXMkyP:matrix.org/$vk78UR0eFCwQMDMTZ7-DWjMVB_LIAwHW6SkjhEcGkQQ?via=matrix.org) that the generation of the Forgejo project contributor stats was taking quite a while on codeberg.org. This was continued with the fact that a few moments later it was once again generating them again; it seemed like they weren't being cached while they were.
- The problem was that the cache TTL is hardcoded to ten minutes and not to the configured TTL. This patch changes that by using the configured TLL for the contributor cache, as this is a computationally heavy operation and should be cached for as long as possible for a good user experience. This doesn't impact the accuracy of this feature because the commit ID of the default branch is used as a cache key.
- Also changed in this patch, is that errors aren't cached and are instead being logged, this is more helpful to the administrator. For the user essentially nothing changed on this side, the contributor stats just looks like it's loading indefinitely.
- Realistically, testing this isn't possible, as the cache library Forgejo currently uses doesn't expose the TTL or expiration time of a key. Manually testing this behavior is quite lengthy, as one of the steps would need to be "wait for ten minutes" and describe how you can notice the data was cached or was just generated, and because you could use different types of cache, it will be quite hard to write down how you could check the TTL of a key for a particular cache (I'm not even sure it's even possible for some).
If a repository has
git config --add push.pushOption submit=".sourcehut/*.yml"
it failed when pushed because of the unknown submit push
option. It will be ignored instead.
Filtering out the push options is done in an earlier stage, when the
hook command runs, before it submits the options map to the private
endpoint.
* move all the push options logic to modules/git/pushoptions
* add 100% test coverage for modules/git/pushoptions
Test coverage for the code paths from which code was moved to the
modules/git/pushoptions package:
* cmd/hook.go:runHookPreReceive
* routers/private/hook_pre_receive.go:validatePushOptions
tests/integration/git_push_test.go:TestOptionsGitPush runs through
both. The test verifying the option is rejected was removed and, if
added again, will fail because the option is now ignored instead of
being rejected.
* cmd/hook.go:runHookProcReceive
* services/agit/agit.go:ProcReceive
tests/integration/git_test.go: doCreateAgitFlowPull runs through
both. It uses variations of AGit related push options.
* cmd/hook.go:runHookPostReceive
* routers/private/hook_post_receive.go:HookPostReceive
tests/integration/git_test.go:doPushCreate called by TestGit/HTTP/sha1/PushCreate
runs through both.
Note that although it provides coverage for this code path it does not use push options.
Fixes: https://codeberg.org/forgejo/forgejo/issues/3651
We haven't decided much (to my knowledge), and I've been using the main branch in production (as one does) and found out even I myself rely on Tab sometimes working to move focus and have been caught off guard by it indenting lines instead.
So this removes Tab handling and instead adds two new buttons to the toolbar. The indentation logic is unchanged (other than now focusing the textarea during button handling, to ensure execCommand works, and thus undo history is preserved).
I'm not sure which terminology to use in tooltips. Could also add keyboard shortcuts for the whole toolbar eventually, but as is this is hopefully an better solution to the problems I previously created than un-merging the whole thing :)
<img width="414" alt="Screenshot with two new buttons" src="/attachments/b7af3aa4-a195-48d1-be0a-1559f25dce8e">
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4263
Reviewed-by: Otto <otto@codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Danko Aleksejevs <danko@very.lv>
Co-committed-by: Danko Aleksejevs <danko@very.lv>
#3654 introduced support for searching non-default branches and tags.
However, the results page lacked any indicator (aside from the url) on which branch/tag the searcg was performed. A branch dropdown was introduced to the code search page when git-grep is used both as an indicator and as a intrusive way to switch between branches/tags.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4262
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
Co-committed-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
Closes#2797
I'm aware of https://github.com/go-gitea/gitea/pull/28163 exists, but since I had it laying around on my drive and collecting dust, I might as well open a PR for it if anyone wants the feature a bit sooner than waiting for upstream to release it or to be a forgejo "native" implementation.
This PR Contains:
- Support for the `workflow_dispatch` trigger
- Inputs: boolean, string, number, choice
Things still to be done:
- [x] API Endpoint `/api/v1/<org>/<repo>/actions/workflows/<workflow id>/dispatches`
- ~~Fixing some UI bugs I had no time figuring out, like why dropdown/choice inputs's menu's behave weirdly~~ Unrelated visual bug with dropdowns inside dropdowns
- [x] Fix bug where opening the branch selection submits the form
- [x] Limit on inputs to render/process
Things not in this PR:
- Inputs: environment (First need support for environments in forgejo)
Things needed to test this:
- A patch for https://code.forgejo.org/forgejo/runner to actually consider the inputs inside the workflow.
~~One possible patch can be seen here: https://code.forgejo.org/Mai-Lapyst/runner/src/branch/support-workflow-inputs~~
[PR](https://code.forgejo.org/forgejo/runner/pulls/199)
## Testing
- Checkout PR
- Setup new development runner with [this PR](https://code.forgejo.org/forgejo/runner/pulls/199)
- Create a repo with a workflow (see below)
- Go to the actions tab, select the workflow and see the notice as in the screenshot above
- Use the button + dropdown to run the workflow
- Try also running it via the api using the `` endpoint
- ...
- Profit!
<details>
<summary>Example workflow</summary>
```yaml
on:
workflow_dispatch:
inputs:
logLevel:
description: 'Log Level'
required: true
default: 'warning'
type: choice
options:
- info
- warning
- debug
tags:
description: 'Test scenario tags'
required: false
type: boolean
boolean_default_true:
description: 'Test scenario tags'
required: true
type: boolean
default: true
boolean_default_false:
description: 'Test scenario tags'
required: false
type: boolean
default: false
number1_default:
description: 'Number w. default'
default: '100'
type: number
number2:
description: 'Number w/o. default'
type: number
string1_default:
description: 'String w. default'
default: 'Hello world'
type: string
string2:
description: 'String w/o. default'
required: true
type: string
jobs:
test:
runs-on: docker
steps:
- uses: actions/checkout@v3
- run: whoami
- run: cat /etc/issue
- run: uname -a
- run: date
- run: echo ${{ inputs.logLevel }}
- run: echo ${{ inputs.tags }}
- env:
GITHUB_CONTEXT: ${{ toJson(github) }}
run: echo "$GITHUB_CONTEXT"
- run: echo "abc"
```
</details>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3334
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
Co-committed-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
There are a few changes of template logic which defines when which elements should be shown on profile page. The motivation is to have the elements when needed and don't when they're not relevant.
## Changes
### RSS button
Now displayed if:
* feeds are enabled
AND one or more of:
* the current user is an admin
* the current user is viewing their profile
* the activity is publicly available
So, basically in cases when the .rss feed actually contains any events. Before this change this button was constantly shown and was giving an empty feed if it was unavailable.
### Public activity tab
The tab is displayed if:
* the current user is an admin
* the current user is viewing their profile
* the activity is publicly available
* the current tab is this exact tab, for example, in case it was accessed by adding `?tab=activity` to the URL, so that the UI is not broken w/o a highlighted tab
So, this tab is not displayed when it's not going to contain any information, but still can be accessed.
### Banner "This user has disabled the public visibility of the activity."
For admins:
* always show the big blue banner to warn that sharing a screenshot of this publicly is bad idea
For self:
* always display a little note about the current visibility status with a "Change" link
For others:
* only display a little note to explain why the activity is not shown
### Heatmap and activity feed
Elements are only displayed when relevant, instead of keeping empty leftovers, for easier testing. This template change is also covered by test. **Everything in this Changes section is covered by test unless I forgot something.**
## Preview
There's obviously too many states to screenshot, here are highlights:
_Warning admin for why they're seeing the information_
_Viewing self - private_
_Viewing self - public_
_Don't have access to the information_
_The tab is not shown when the activity can't be accessed_
_Can't access the RSS feed_
_Can access the RSS feed_
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4189
Reviewed-by: Otto <otto@codeberg.org>
#4059 was unfortunately incomplete: some custom_url fields are currently shown, even if they are not used by the provider. Moreover the `Use Custom URLs Instead of Default URLs` is always checked by default.
Manual testing:
- go to http://localhost:3000/admin/auths
- click on `Add authentication source`
- Choose `Authentication type`: `OAuth2`
- Choose `OAuth2 provider`: `GitLab`
- verify that the `Use Custom URLs Instead of Default URLs` option is **initially unchecked**
- enable the `Use Custom URLs Instead of Default URLs` checkbox
- verify that only the fields "Authorize", "Token" and "Profile" URLs are shown (no "Email URL", nor "Tenant").
- Switch the `OAuth2 provider` to `Azure AD v2`
- verify that the `Use Custom URLs Instead of Default URLs` option is **initially checked**
- verify that only the field "Tenant" is shown (with the default "organizations").
Note: this is loosely based on the upstream fix https://github.com/go-gitea/gitea/pull/31246 which I initially overlooked.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4194
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
Ports fuzzy search for `/issues` and `/pulls` from gitea.
Adds fuzzy search for `/user/repo/issues` and `/user/repo/pulls`.
---
## Notes
### Port: [`gitea#be5be0ac81`](be5be0ac81)
- CONFLICT (content): Merge conflict in routers/web/user/home.go
Conflict resolved by
1. keeping both `PageIsOrgIssues` and the newly introduced `IsFuzzy`
2. using `pager.AddParam(ctx, "fuzzy", "IsFuzzy")` rather than `pager.AddParamString("fuzzy", fmt.Sprintf("%v", isFuzzy))`
- CONFLICT (content): Merge conflict in templates/user/dashboard/issues.tmpl
Conflict resolved by keeping the changes from #4096, and picking the `&fuzzy=${{.IsFuzzy}}` inclusion to all urls and `{{if .PageIsPulls}}...`
### Port: [`gitea#fede3cbada`](fede3cbada)
- CONFLICT (content): Merge conflict in templates/user/dashboard/issues.tmpl
Conflict resolved by keeping previous changes and picking the replacement of `{{if .PageIsPulls}}...` with `{{template "shared/search/combo_fuzzy"...` which contains the replacement of `explorer.go` to `explorer.go_to`
### Fixup commit
replaces `Iif` with `if` which was introduced in gitea#fede3cbada
### Feature commit
adds in support for /user/repo/(issues|pulls) + test
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Kerwin Bryant <kerwin612@qq.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4160
Reviewed-by: twenty-panda <twenty-panda@noreply.codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
Co-committed-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
While trying to understand #1236, I was quite confused not to see the `Use Custom URLs` checkbox.
This checkbox disappeared in b95a893b22 (because `getElementById` does not expect a `#` as first char), fixed in 4e816e1326.
After solving this, switching from `Nextcloud` to `OpenID Connect` triggered a JS error, which is addressed in 3efa4d836a.
Manual testing:
- go to http://localhost:3000/admin/auths
- click on `Add authentication source`
- Choose `Authentication type`: `OAuth2`
- Choose `OAuth2 provider`: `Nextcloud`
- check that the `Use Custom URLs Instead of Default URLs` checkbox toggles the fields below
- let the checkbox be checked
- Switch the `OAuth2 provider` to `OpenID Connect`
- ensure that no JS error is shown
- Switch the `OAuth2 provider` to `Mastodon`
- check that the fields below `Use Custom URLs Instead of Default URLs` have the right defaults (mastodon.social)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4059
Reviewed-by: twenty-panda <twenty-panda@noreply.codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
Fix adopt repository has empty object name in database (#31333)
Fix#31330Fix#31311
A workaround to fix the old database is to update object_format_name to
`sha1` if it's empty or null.
(cherry picked from commit 1968c2222dcf47ebd1697afb4e79a81e74702d31)
With tests services/repository/adopt_test.go
More info in the linked PR.
---
Make positioning of the repo tabs make more sense. This is an isolated implementation for one of many changes discussed in the referenced issue, it will work good without the other changes too.
## Changes
- Actions are moved to the edge. This tab is the least relevant to both visitors and developers. The first don't really need it at all, the second only visit it when something goes unexpected (run did not happen or attached to the wrong event), or just to see the run queue to know when their actions is going to get processed. This is not a tab with always-relevant information.
- put Packages after releases. The Packages are like a download page for Releases, but for released packages instead of binaries/source code. It is relevant to Releases, so it should stay close, but it is secondary to Releases by importance. For example, because they don't actually contain release notes unlike Releases.
- the above makes Projects appear next to Issues and Pull requests which I think is nice as they're related.
## Preview
### v7
https://codeberg.org/attachments/c434e8fd-aaab-4c27-9071-2a3ba68ad4b7
### This PR
https://codeberg.org/attachments/74743c03-883e-40cf-8cb1-384d1d8cf63c
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4139
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Otto <otto@codeberg.org>
Reviewed-by: Beowulf <beowulf@noreply.codeberg.org>
closes#3855
unlike #3854, this implementation uses a generic details html tag and a bit of tailwind magic...
---
## Maintainers Note
- previously tailwind classes of the form `[-a-zA-Z:0-9_.]` was disabled, however they were enabled since they were required for the `group-open:` classes
---
## Manual Testing
1. Visit the code search results after submitting a valid query for repo (if indexer disabled) or repo, user, explore (if indexer enabled)
2. Verify thst
1. the results are unfloded/open by default
2. the chevron points down when open and right when closed
<video src="/attachments/5a55c56f-6159-4422-ab80-962e0121e7d2" title="fold2.mp4" controls></video>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4134
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Beowulf <beowulf@noreply.codeberg.org>
Co-authored-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
Co-committed-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
This overrides handling of Tab and Enter keys in the ComboMarkdownEditor, so that:
* Pressing Tab prepending 4 spaces to the line under cursor, or all the lines in the selection.
* Pressing Shift+Tab removes up to 4 spaces.
* Pressing Enter repeats any indentation and a "repeatable" prefix (list or blockquote) from the current line.
Since Tab "capture" can interfere with keyboard navigation, it's only done if there was any previous input in the textarea or if it was selected with a pointer. Additionally, presing Esc will make the textarea lose focus, resuming tab navigation. This seems adequate to me, but I might be wrong.
Had to use the "deprecated" execCommand method, since anything else I tried messes up the undo history. There's a fallback for when (if?) it's actually removed.
Only tested in desktop Firefox and Chrome so far.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4072
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Beowulf <beowulf@noreply.codeberg.org>
Co-authored-by: Danko Aleksejevs <danko@very.lv>
Co-committed-by: Danko Aleksejevs <danko@very.lv>
* disabled the button itself, but added the tooltip to the form, because it didn't work for the button and likely has something to do with JS
* added an integration test to verify the new logic
## Preview
|Signed in|Guest|
|-|-|
|||
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4095
Reviewed-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
This Fixes#3962 by adding `!important` to the margin of the heading in the rendered markdown.
In the current behaviour, the margin-top was always overridden by a global css-rule. This is prevented by this change.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4076
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: Beowulf <beowulf@beocode.eu>
Co-committed-by: Beowulf <beowulf@beocode.eu>
Change the copy to use `ActionsArtifact.StoragePath` instead of the
`ArtifactPath`. Skip artifacts that are expired, and don't error if the
file to copy does not exist.
---
When trying to migrate actions artifact storage from local to MinIO, we
encountered errors that prevented the process from completing
successfully:
* The migration tries to copy the files using the per-run
`ArtifactPath`, instead of the unique `StoragePath`.
* Artifacts that have been marked expired and had their files deleted
would throw an error
* Artifacts that are pending, but don't have a file uploaded yet will
throw an error.
This PR addresses these cases, and allow the process to complete
successfully.
(cherry picked from commit 8de8972baf5d82ff7b58ed77d78e8e1869e64eb5)
Adds a feature similar to this https://github.blog/changelog/2021-11-24-specify-theme-context-for-images-in-markdown/ , by adding styles to elements which `src` or `href` attribute ends with `#light-mode-only` or `#dark-mode-only`. To improve compability, the github variants with the `gh-` prefix are also contained.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3985
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
Co-committed-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
This is a PR for #3616
Currently added a new optional config `SLOGAN` in ini file. When this config is set title page is modified in APP_NAME [ - SLOGAN]
Example in image below
Add the new config value in the admin settings page (readonly)
## TODO
* [x] Add the possibility to add the `SLOGAN` config from the installation form
* [ ] Update https://forgejo.org/docs/next/admin/config-cheat-sheet
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3752
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: mirko <mirko.perillo@gmail.com>
Co-committed-by: mirko <mirko.perillo@gmail.com>
The right to force merge is uses the wrong predicate and
applies to instance admins:
ctx.user.IsAdmin
It must apply to repository admins and use the following predicate:
ctx.userPerm.IsAdmin()
This regression is from the ApplyToAdmins implementation in
79b7089360.
Fixes: https://codeberg.org/forgejo/forgejo/issues/3780
When performing migrations, and need to remap external users to local
ones, when no local mapping is possible, map the external user to Ghost,
rather than the user who initiated the migration.
Mapping the external user to the migration initiator has the potential
of breaking assumptions elsewhere, like only having one review per pull
request per user. Mapping these migrated, locally unavailable users to
Ghost makes sure these - often hidden - assumptions do not break.
Fixes#3860.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
regression from 767e9634d3. It changed
the parsing of the [admin] section from being derived from the content
of each key with mustMapSetting(rootCfg, "admin", &Admin) to
explicitly listing all keys in the code.
SEND_NOTIFICATION_EMAIL_ON_NEW_USER was not added and therefore
ignored. As a consequence notifications of newly registered users were
never sent.
For security reasons, scoping access to a redis server via ACL rules is
a good practice. Some parts of the codebase handles prefix like cache[^1]
and session[^2], but the queue module doesn't.
This patch adds this missing functionality to the queue module.
Note about relevant test:
I tried to keep the PR as small as possible (and reasonable), and not
change how the test runs. Updated the existing test to use the same
redis address and basically duplicated the test with the extra flag. It
does NOT test if the keys are correct, it ensures only it works as
expected. To make assertions about the keys, the whole test has to be
updated as the general wrapper doesn't allow the main test to check
anything provider (redis) specific property. That's not something I
wanted to take on now.
[^1]: e4c3c039be/modules/cache/cache_redis.go (L139-L150)
[^2]: e4c3c039be/modules/session/redis.go (L122-L129)
Signed-off-by: Victoria Nadasdi <victoria@efertone.me>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3836
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Victoria Nadasdi <victoria@efertone.me>
Co-committed-by: Victoria Nadasdi <victoria@efertone.me>
Previously, if no branch was explicitly specified for a workflow, it
defaulted to the default branch of the repo. This worked fine for
workflows that were triggered on push, but it prevented showing badges
for workflows that only run on tags, or on schedule - since they do not
run on a specific branch.
Thus, relax the conditions, and if no branch is specified, just return
the latest run of the given workflow. If one is specified, *then*
restrict it to said branch.
Fixes#3487.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Current package registry for RubyGems does not work with Bundler, because it implements neither the [compact index](https://guides.rubygems.org/rubygems-org-compact-index-api/) or the [dependency API](https://guides.rubygems.org/rubygems-org-api/). As a result, bundler complains about finding non-existing dependencies when installing anything with dependency: `revealed dependencies not in the API or the lockfile`.
This patch provides a minimal implementation for the compact index API to solve this issue. Specifically, we implemented a version that does not cache the results / do incremental updates; which is consistent with the current implementation.
Testing:
* Modified existing integration tests.
* Manually Verified bundler is able to parse the served versions / info file.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3811
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Haoyuan (Bill) Xing <me@hoppinglife.com>
Co-committed-by: Haoyuan (Bill) Xing <me@hoppinglife.com>
This commit changes the code that deletes a runner so it updates the UUID before deleting the record. The new UUID is set to 8 0xff bytes followed by a little endian version of the record's numeric ID. Such UUIDs cannot be created from tokens when registering runners, as the first 16 bytes of the token are in the `[0-9a-f]` range. This should prevent deleted runners from colliding with new records if the tokens share the same first 16 characters.
It is a possible solution to issue #3828
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3830
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Emmanuel BENOÎT <tseeker@nocternity.net>
Co-committed-by: Emmanuel BENOÎT <tseeker@nocternity.net>
In
801792e4dc Rename Str2html to SanitizeHTML and clarify its behavior (followup)
the replacement was incorrect because
c9d0e63c20 Remove unnecessary "Str2html" modifier from templates
was not applied and Str2html should have not been present in the first
place.
Fixes: https://codeberg.org/forgejo/forgejo/issues/3554
Before explaining the fix itself, lets look at the `action` table, and
how it is populated. Data is only ever inserted into it via
`activities_model.NotifyWatchers`, which will:
- Insert a row for each activity with `UserID` set to the acting user's
ID - this is the original activity, and is always inserted if anything
is to be inserted at all.
- It will insert a copy of each activity with the `UserID` set to the
repo's owner, if the owner is an Organization, and isn't the acting
user.
- It will insert a copy of each activity for every watcher of the repo,
as long as the watcher in question has read permission to the repo
unit the activity is about.
This means that if a repository belongs to an organizations, for most
activities, it will have at least two rows in the table. For
repositories watched by people other than their owner, an additional row
for each watcher.
These are useful duplicates, because they record which activities are
relevant for a particular user. However, for cases where we wish to see
the activities that happen around a repository, without limiting the
results to a particular user, we're *not* interested in the duplicates
stored for the watchers and the org. We only need the originals.
And this is what this change does: it introduces an additional option to
`GetFeedsOptions`: `OnlyPerformedByActor`. When this option is set,
`activities.GetFeeds()` will only return the original activities, where
the user id and the acting user id are the same. As these are *always*
inserted, we're not missing out on any activities. We're just getting
rid of the duplicates. As this is an additional `AND` condition, it can
never introduce items that would not have been included in the result
set before, it can only reduce, not extend.
These duplicates were only affecting call sites where `RequestedRepo`
was set, but `RequestedUser` and `RequestedTeam` were not. Both of those
call sites were updated to set `OnlyPerformedByActor`. As a result,
repository RSS feeds, and the `/repos/{owner}/{repo}/activities/feeds`
API end points no longer return dupes, only the original activities.
Rather than hardcoding this behaviour into `GetFeeds()` itself, I chose
to implement it as an explicit option, for the sake of clarity.
FixesCodeberg/Community#684, and addresses gitea#20986.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This fixes `initRepoPullRequestAllowMaintainerEdit()` to submit the form correctly (as a web form, rather than as JSON payload).
Fixes#3618, cherry picked from gitea#30854.
Co-Authored-By: wxiaoguang <wxiaoguang@gmail.com>
---
Manual testing steps:
- Open a PR against any repository, with the "Allow edits from maintainers" option checked.
- Open the developer console (`Ctrl-Shift-I` on Firefox), and look at the Network tab.
- Visit the PR, find the "Allow edits from maintainers" checkbox, and click it.
- See the developer console, and check that the response says the setting is false.
- Refresh the page *completely* (`Ctrl-Shift-R` on Firefox)
- Observe that the setting is off.
- Click the box again to enable it.
- See the developer console, and check that the response says the setting is true.
- Reload without cache again (`Ctrl-Shift-R` on Firefox)
- Observe that the setting is now on.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3675
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Co-committed-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- add a new button to the org view that is only shown to the org members
- add integration test to verify the expected navigatability
- add a new translation string to that button
- fix display style of "View <orgname>" button on the dashboard
- fix gap size between buttons on the org view by utilizing the common class top-right-buttons
This allows `nix flake metadata` and nix in general to lock a *branch*
tarball link in a manner that causes it to fetch the correct commit even
if the branch is updated with a newer version.
For further context, Nix flakes are a feature that, among other things,
allows for "inputs" that are "github:someuser/somerepo",
"https://some-tarball-service/some-tarball.tar.gz",
"sourcehut:~meow/nya" or similar. This feature allows our users to fetch
tarballs of git-based inputs to their builds rather than using git to
fetch them, saving significant download time.
There is presently no gitea or forgejo specific fetcher in Nix, and we
don't particularly wish to have one. Ideally (as a developer on a Nix
implementation myself) we could just use the generic tarball fetcher and
not add specific forgejo support, but to do so, we need additional
metadata to know which commit a given *branch* tarball represents, which
is the purpose of the Link header added here.
The result of this patch is that a Nix user can specify `inputs.something.url =
"https://forgejo-host/some/project/archive/main.tar.gz"` in flake.nix
and get a link to some concrete tarball for the actual commit in the
lock file, then when they run `nix flake update` in the future, they
will get the latest commit in that branch.
Example of it working locally:
» nix flake metadata --refresh 'http://localhost:3000/api/v1/repos/jade/cats/archive/main.tar.gz?dir=configs/nix'
Resolved URL: http://localhost:3000/api/v1/repos/jade/cats/archive/main.tar.gz?dir=configs/nix
Locked URL: 804ede182b.tar.gz?dir=configs
/nix&narHash=sha256-yP7KkDVfuixZzs0fsqhSETXFC0y8m6nmPLw2GrAMxKQ%3D
Description: Computers with the nixos
Path: /nix/store/s856c6yqghyan4v0zy6jj19ksv0q22nx-source
Revision: 804ede182b6b66469b23ea4d21eece52766b7a06
Last modified: 2024-05-02 00:48:32
For details on the header value, see:
56763ff918/doc/manual/src/protocols/tarball-fetcher.md
Also add a test for GogsDownloaderFactory.New() to make sure
that the URL of the source repository is parsed correctly.
When the source gogs instance is hosted at a subpath like `https://git.example.com/gogs/<username>/<reponame>` the migration fails.
This PR fixes that.
Co-authored-by: hecker <tomas.hecker@gmail.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3572
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: varp0n <tom@gkstn.de>
Co-committed-by: varp0n <tom@gkstn.de>
When subscribing or unsubscribing to/from an issue on the web ui, the
request was posted to a route handled by `repo.IssueWatch`. This
function used `ctx.Req.PostForm.Get()`, erroneously.
`request.PostForm` is *only* available if `request.ParseForm()` has been
called before it. The function in question did not do that. Under some
circumstances, something, somewhere did end up calling `ParseForm()`,
but not in every scenario.
Since we do not need to check for multiple values, the easiest fix here
is to use `ctx.Req.PostFormValue`, which will call `ParseForm()` if
necessary.
Fixes#3516.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
When a logged in user with no repositories visits their dashboard, it will
display a search box that lists their own repositories.
This is served by the `repo.SearchRepos` handler, which in turn calls
`commitstatus_service.FindReposLastestCommitStatuses()` with an empty
repo list.
That, in turn, will call `git_model.FindBranchesByRepoAndBranchName()`,
with an empty map. With no map, `FindBranchesByRepoAndBranchName()` ends
up querying the entire `branch` table, because no conditions were set
up.
Armed with a gazillion repo & commit shas, we return to
`FindReposLastestCommitStatuses`, and promptly call
`git_model.GetLatestCommitStatusForPairs`, which constructs a monstrous
query with so many placeholders that the database tells us to go
somewhere else, and flips us off. At least on instances the size of
Codeberg. On smaller instances, it will eventually return, and throw
away all the data, and return an empty set, having performed all this
for naught.
We fix this by short-circuiting `FindBranchesByRepoAndBranchName`, and
returning fast if our inputs are empty.
A test case is included.
Fixes#3521.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
