Now that my colleague just posted a wonderful blog post https://blog.datalad.org/posts/forgejo-runner-podman-deployment/ on forgejo runner, some time I will try to add that damn codespell action to work on CI here ;) meanwhile some typos managed to sneak in and this PR should address them (one change might be functional in a test -- not sure if would cause a fail or not)
### Release notes
- [ ] I do not want this change to show in the release notes.
- [ ] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4857
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Yaroslav Halchenko <debian@onerussian.com>
Co-committed-by: Yaroslav Halchenko <debian@onerussian.com>
- Add https://github.com/playwright-community/eslint-plugin-playwright
as a linter for the playwright tests.
- `no-networkidle` and `no-conditional-in-test` are disabled as fixing
those doesn't seem to really improve testing quality for our use case.
- Some non-recommended linters are enabled to ensure consistency (the
prefer rules).
- Currently if you want to update the milestone of an issue or pull
request, your whole page will be reloaded to reflect the newly set
milestone. This is quite unecessary, as only the milestone text is
updated and a new timeline event is added.
- This patch converts the milestone section in the issue/pull request
sidebar to use HTMX, so it becomes a progressive element and avoids
reloading the whole page to update the milestone.
- The update of the milestone section itself is quite straightforward
and nothing special is happening. To support adding new timeline events,
a new element `#insert-timeline` is conviently placed after the last
timeline event, which can be used with
[`hx-swap-oob`](https://htmx.org/attributes/hx-swap-oob/) to position
new timeline events before that element.
- Adds E2E test.
- There were two issues with the profile card since the introduction of
HTMX in 3e8414179c. If an HTMX request
resulted in a flash message, it wasn't being shown and HTMX was
replacing all the HTML content instead of morphing it into the existing
DOM which caused event listeners to be lost for buttons.
- Flash messages are now properly being shown by using `hx-swap-oob`
and sending the alerts on a HTMX request, this does mean it requires
server-side changes in order to support HTMX requests like this, but
it's luckily not a big change either.
- Morphing is now enabled for the profile card by setting
`hx-swap="morph"`, and weirdly, the morphing library was already
installed and included as a dependency. This solves the issue of buttons
losing their event listeners.
- This patch also adds HTMX support to the modals feature, which means
that the blocking feature on the profile card now takes advantage of
HTMX.
- Added a E2E test.
We haven't decided much (to my knowledge), and I've been using the main branch in production (as one does) and found out even I myself rely on Tab sometimes working to move focus and have been caught off guard by it indenting lines instead.
So this removes Tab handling and instead adds two new buttons to the toolbar. The indentation logic is unchanged (other than now focusing the textarea during button handling, to ensure execCommand works, and thus undo history is preserved).
I'm not sure which terminology to use in tooltips. Could also add keyboard shortcuts for the whole toolbar eventually, but as is this is hopefully an better solution to the problems I previously created than un-merging the whole thing :)
<img width="414" alt="Screenshot with two new buttons" src="/attachments/b7af3aa4-a195-48d1-be0a-1559f25dce8e">
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4263
Reviewed-by: Otto <otto@codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Danko Aleksejevs <danko@very.lv>
Co-committed-by: Danko Aleksejevs <danko@very.lv>
Closes#2797
I'm aware of https://github.com/go-gitea/gitea/pull/28163 exists, but since I had it laying around on my drive and collecting dust, I might as well open a PR for it if anyone wants the feature a bit sooner than waiting for upstream to release it or to be a forgejo "native" implementation.
This PR Contains:
- Support for the `workflow_dispatch` trigger
- Inputs: boolean, string, number, choice
Things still to be done:
- [x] API Endpoint `/api/v1/<org>/<repo>/actions/workflows/<workflow id>/dispatches`
- ~~Fixing some UI bugs I had no time figuring out, like why dropdown/choice inputs's menu's behave weirdly~~ Unrelated visual bug with dropdowns inside dropdowns
- [x] Fix bug where opening the branch selection submits the form
- [x] Limit on inputs to render/process
Things not in this PR:
- Inputs: environment (First need support for environments in forgejo)
Things needed to test this:
- A patch for https://code.forgejo.org/forgejo/runner to actually consider the inputs inside the workflow.
~~One possible patch can be seen here: https://code.forgejo.org/Mai-Lapyst/runner/src/branch/support-workflow-inputs~~
[PR](https://code.forgejo.org/forgejo/runner/pulls/199)
## Testing
- Checkout PR
- Setup new development runner with [this PR](https://code.forgejo.org/forgejo/runner/pulls/199)
- Create a repo with a workflow (see below)
- Go to the actions tab, select the workflow and see the notice as in the screenshot above
- Use the button + dropdown to run the workflow
- Try also running it via the api using the `` endpoint
- ...
- Profit!
<details>
<summary>Example workflow</summary>
```yaml
on:
workflow_dispatch:
inputs:
logLevel:
description: 'Log Level'
required: true
default: 'warning'
type: choice
options:
- info
- warning
- debug
tags:
description: 'Test scenario tags'
required: false
type: boolean
boolean_default_true:
description: 'Test scenario tags'
required: true
type: boolean
default: true
boolean_default_false:
description: 'Test scenario tags'
required: false
type: boolean
default: false
number1_default:
description: 'Number w. default'
default: '100'
type: number
number2:
description: 'Number w/o. default'
type: number
string1_default:
description: 'String w. default'
default: 'Hello world'
type: string
string2:
description: 'String w/o. default'
required: true
type: string
jobs:
test:
runs-on: docker
steps:
- uses: actions/checkout@v3
- run: whoami
- run: cat /etc/issue
- run: uname -a
- run: date
- run: echo ${{ inputs.logLevel }}
- run: echo ${{ inputs.tags }}
- env:
GITHUB_CONTEXT: ${{ toJson(github) }}
run: echo "$GITHUB_CONTEXT"
- run: echo "abc"
```
</details>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3334
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
Co-committed-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
This overrides handling of Tab and Enter keys in the ComboMarkdownEditor, so that:
* Pressing Tab prepending 4 spaces to the line under cursor, or all the lines in the selection.
* Pressing Shift+Tab removes up to 4 spaces.
* Pressing Enter repeats any indentation and a "repeatable" prefix (list or blockquote) from the current line.
Since Tab "capture" can interfere with keyboard navigation, it's only done if there was any previous input in the textarea or if it was selected with a pointer. Additionally, presing Esc will make the textarea lose focus, resuming tab navigation. This seems adequate to me, but I might be wrong.
Had to use the "deprecated" execCommand method, since anything else I tried messes up the undo history. There's a fallback for when (if?) it's actually removed.
Only tested in desktop Firefox and Chrome so far.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4072
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Beowulf <beowulf@noreply.codeberg.org>
Co-authored-by: Danko Aleksejevs <danko@very.lv>
Co-committed-by: Danko Aleksejevs <danko@very.lv>
When a comment was added and saved with the preview tab active, the
preview tab is still active, when the comment is edited again.
This adds a "hacky" solution, but it works and is simple.
Every time the edit is "started" and the editor already exists, the tab
with the edit text field gets clicked to activate it.
Fixes#1334
Adds a feature similar to this https://github.blog/changelog/2021-11-24-specify-theme-context-for-images-in-markdown/ , by adding styles to elements which `src` or `href` attribute ends with `#light-mode-only` or `#dark-mode-only`. To improve compability, the github variants with the `gh-` prefix are also contained.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3985
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
Co-committed-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
Noteable additions:
- `redefines-builtin-id` forbid variable names that shadow go builtins
- `empty-lines` remove unnecessary empty lines that `gofumpt` does not
remove for some reason
- `superfluous-else` eliminate more superfluous `else` branches
Rules are also sorted alphabetically and I cleaned up various parts of
`.golangci.yml`.
(cherry picked from commit 74f0c84fa4245a20ce6fb87dac1faf2aeeded2a2)
Conflicts:
.golangci.yml
apply the linter recommendations to Forgejo code as well
This will move the settings button back to the right, like known from
older versions.
For this, the overflow-menu was changed when a setting button is
available. If no settings button is available, the behavior will not
change.
Fixes#3301
Fixes: https://github.com/go-gitea/gitea/issues/29981. Introduce
`.secondary-nav` as a universal way for styling and margin adjustments
inside `.page-content`.
If the first child of `.page-content` is `.secondary-nav`, we add margin
below it, otherwise we add padding to the first child. Notable changes:
- `--color-header-wrapper` is replaced with `--color-secondary-nav-bg`.
- `navbar` class is removed.
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
---
Conflict resolution: Trivial conflict & changed selector to reflect new
classes.
Ref: https://codeberg.org/forgejo/forgejo/issues/2776
(cherry picked from commit 3ccda41a539b8ba7841919ee12dc2877ddc03818)
This should be a failing test for Firefox (but working in Chrome?) for
the taborder in the explore page.
Tabbing through the page should ensure that certain elements are focused
at least once.
This adds the ability to run `make test-e2e-debugserver` to start a
forgejo server pupulated with the test data from `models/fixtures`. This
is particularly useful for debugging the e2e tests with a external tool,
such as the Playwright extension for VSCode [1].
[1] https://open-vsx.org/extension/ms-playwright/playwright
- MySQL 5.7 support and testing is dropped
- MySQL tests now execute against 8.1, up from 5.7 and 8.0
- PostgreSQL 10 and 11 support ist dropped
- PostgreSQL tests now execute against 16, up from 15
- MSSQL 2008 support is dropped
- MSSQL tests now run against locked 2022 version
Fixes: https://github.com/go-gitea/gitea/issues/25657
Ref: https://endoflife.date/mysql
Ref: https://endoflife.date/postgresql
Ref: https://endoflife.date/mssqlserver
## ⚠️ BREAKING ⚠️
Support for MySQL 5.7, PostgreSQL 10 and 11, and MSSQL 2008 is dropped.
You are encouraged to upgrade to supported versions.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
I kept sending pull requests that consisted of one-line changes. It's
time to
settle this once and for all. (Maybe.)
- Explain Gitea behavior and the consequences of each
setting better, so that the user does not have to consult
the docs.
- Do not use different spellings of identical terms
interchangeably, e.g. `e-mail` and `email`.
- Use more conventional terms to describe the same things,
e.g. `Confirm Password` instead of `Re-Type Password`.
- Introduces additional clarification for Mirror Settings
- Small adjustments in test
- This is a cry for help.
- Grammar and spelling consistencies for en-US locale
(e.g. cancelled -> canceled)
- Introduce tooltip improvements.
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
1. The "web" package shouldn't depends on "modules/context" package,
instead, let each "web context" register themselves to the "web"
package.
2. The old Init/Free doesn't make sense, so simplify it
* The ctx in "Init(ctx)" is never used, and shouldn't be used that way
* The "Free" is never called and shouldn't be called because the SSPI
instance is shared
---------
Co-authored-by: Giteabot <teabot@gitea.io>
## ⚠️ Breaking
The `log.<mode>.<logger>` style config has been dropped. If you used it,
please check the new config manual & app.example.ini to make your
instance output logs as expected.
Although many legacy options still work, it's encouraged to upgrade to
the new options.
The SMTP logger is deleted because SMTP is not suitable to collect logs.
If you have manually configured Gitea log options, please confirm the
logger system works as expected after upgrading.
## Description
Close#12082 and maybe more log-related issues, resolve some related
FIXMEs in old code (which seems unfixable before)
Just like rewriting queue #24505 : make code maintainable, clear legacy
bugs, and add the ability to support more writers (eg: JSON, structured
log)
There is a new document (with examples): `logging-config.en-us.md`
This PR is safer than the queue rewriting, because it's just for
logging, it won't break other logic.
## The old problems
The logging system is quite old and difficult to maintain:
* Unclear concepts: Logger, NamedLogger, MultiChannelledLogger,
SubLogger, EventLogger, WriterLogger etc
* Some code is diffuclt to konw whether it is right:
`log.DelNamedLogger("console")` vs `log.DelNamedLogger(log.DEFAULT)` vs
`log.DelLogger("console")`
* The old system heavily depends on ini config system, it's difficult to
create new logger for different purpose, and it's very fragile.
* The "color" trick is difficult to use and read, many colors are
unnecessary, and in the future structured log could help
* It's difficult to add other log formats, eg: JSON format
* The log outputer doesn't have full control of its goroutine, it's
difficult to make outputer have advanced behaviors
* The logs could be lost in some cases: eg: no Fatal error when using
CLI.
* Config options are passed by JSON, which is quite fragile.
* INI package makes the KEY in `[log]` section visible in `[log.sub1]`
and `[log.sub1.subA]`, this behavior is quite fragile and would cause
more unclear problems, and there is no strong requirement to support
`log.<mode>.<logger>` syntax.
## The new design
See `logger.go` for documents.
## Screenshot
<details>
</details>
## TODO
* [x] add some new tests
* [x] fix some tests
* [x] test some sub-commands (manually ....)
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
Enable [forbidigo](https://github.com/ashanbrown/forbidigo) linter which
forbids print statements. Will check how to integrate this with the
smallest impact possible, so a few `nolint` comments will likely be
required. Plan is to just go through the issues and either:
- Remove the print if it is nonsensical
- Add a `//nolint` directive if it makes sense
I don't plan on investigating the individual issues any further.
<details>
<summary>Initial Lint Results</summary>
```
modules/log/event.go:348:6: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
modules/log/event.go:382:6: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
modules/queue/unique_queue_disk_channel_test.go:20:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("TempDir %s\n", tmpDir)
^
contrib/backport/backport.go:168:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Backporting %s to %s as %s\n", pr, localReleaseBranch, backportBranch)
^
contrib/backport/backport.go:216:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Navigate to %s to open PR\n", url)
^
contrib/backport/backport.go:223:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `xdg-open %s`\n", url)
^
contrib/backport/backport.go:233:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git push -u %s %s`\n", remote, backportBranch)
^
contrib/backport/backport.go:243:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Amending commit to prepend `Backport #%s` to body\n", pr)
^
contrib/backport/backport.go:272:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("* Attempting git cherry-pick --continue")
^
contrib/backport/backport.go:281:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Attempting git cherry-pick %s\n", sha)
^
contrib/backport/backport.go:297:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Current branch is %s\n", currentBranch)
^
contrib/backport/backport.go:299:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Current branch is %s - not checking out\n", currentBranch)
^
contrib/backport/backport.go:304:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Branch %s already exists. Checking it out...\n", backportBranch)
^
contrib/backport/backport.go:308:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git checkout -b %s %s`\n", backportBranch, releaseBranch)
^
contrib/backport/backport.go:313:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git fetch %s main`\n", remote)
^
contrib/backport/backport.go:316:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:319:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:321:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git fetch %s %s`\n", remote, releaseBranch)
^
contrib/backport/backport.go:324:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:327:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
models/unittest/fixtures.go:50:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Unsupported RDBMS for integration tests")
^
models/unittest/fixtures.go:89:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("LoadFixtures failed after retries: %v\n", err)
^
models/unittest/fixtures.go:110:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Failed to generate sequence update: %v\n", err)
^
models/unittest/fixtures.go:117:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Failed to update sequence: %s Error: %v\n", value, err)
^
models/migrations/base/tests.go:118:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Environment variable $GITEA_ROOT not set")
^
models/migrations/base/tests.go:127:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Could not find gitea binary at %s\n", setting.AppPath)
^
models/migrations/base/tests.go:134:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Environment variable $GITEA_CONF not set - defaulting to %s\n", giteaConf)
^
models/migrations/base/tests.go:145:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to create temporary data path %v\n", err)
^
models/migrations/base/tests.go:154:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to InitFull: %v\n", err)
^
models/migrations/v1_11/v112.go:34:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error: %v", err)
^
contrib/fixtures/fixture_generation.go:36:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("CreateTestEngine: %+v", err)
^
contrib/fixtures/fixture_generation.go:40:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("PrepareTestDatabase: %+v\n", err)
^
contrib/fixtures/fixture_generation.go:46:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generate '%s': %+v\n", r, err)
^
contrib/fixtures/fixture_generation.go:53:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generate '%s': %+v\n", g.name, err)
^
contrib/fixtures/fixture_generation.go:71:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s created.\n", path)
^
services/gitdiff/gitdiff_test.go:543:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
services/gitdiff/gitdiff_test.go:560:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
services/gitdiff/gitdiff_test.go:577:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
modules/web/routing/logger_manager.go:34:2: use of `print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
print Printer
^
modules/doctor/paths.go:109:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Warning: can't remove temporary file: '%s'\n", tmpFile.Name())
^
tests/test_utils.go:33:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf(format+"\n", args...)
^
tests/test_utils.go:61:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Environment variable $GITEA_CONF not set, use default: %s\n", giteaConf)
^
cmd/actions.go:54:9: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
_, _ = fmt.Printf("%s\n", respText)
^
cmd/admin_user_change_password.go:74:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s's password has been successfully updated!\n", user.Name)
^
cmd/admin_user_create.go:109:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generated random password is '%s'\n", password)
^
cmd/admin_user_create.go:164:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Access token was successfully created... %s\n", t.Token)
^
cmd/admin_user_create.go:167:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("New user '%s' has been successfully created!\n", username)
^
cmd/admin_user_generate_access_token.go:74:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s\n", t.Token)
^
cmd/admin_user_generate_access_token.go:76:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Access token was successfully created: %s\n", t.Token)
^
cmd/admin_user_must_change_password.go:56:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Updated %d users setting MustChangePassword to %t\n", n, mustChangePassword)
^
cmd/convert.go:44:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Converted successfully, please confirm your database's character set is now utf8mb4")
^
cmd/convert.go:50:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Converted successfully, please confirm your database's all columns character is NVARCHAR now")
^
cmd/convert.go:52:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("This command can only be used with a MySQL or MSSQL database")
^
cmd/doctor.go:104:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
cmd/doctor.go:105:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Check if you are using the right config file. You can use a --config directive to specify one.")
^
cmd/doctor.go:243:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
cmd/embedded.go:154:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(a.path)
^
cmd/embedded.go:198:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Using app.ini at", setting.CustomConf)
^
cmd/embedded.go:217:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Extracting to %s:\n", destdir)
^
cmd/embedded.go:253:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s already exists; skipped.\n", dest)
^
cmd/embedded.go:275:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(dest)
^
cmd/generate.go:63:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", internalToken)
^
cmd/generate.go:66:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/generate.go:78:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", JWTSecretBase64)
^
cmd/generate.go:81:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/generate.go:93:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", secretKey)
^
cmd/generate.go:96:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/keys.go:74:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(strings.TrimSpace(authorizedString))
^
cmd/mailer.go:32:4: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print("warning: Content is empty")
^
cmd/mailer.go:35:3: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print("Proceed with sending email? [Y/n] ")
^
cmd/mailer.go:40:4: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("The mail was not sent")
^
cmd/mailer.go:49:9: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
_, _ = fmt.Printf("Sent %s email(s) to all users\n", respText)
^
cmd/serv.go:147:3: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Gitea: SSH has been disabled")
^
cmd/serv.go:153:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("error showing subcommand help: %v\n", err)
^
cmd/serv.go:175:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there! You've successfully authenticated with the deploy key named " + key.Name + ", but Gitea does not provide shell access.")
^
cmd/serv.go:177:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there! You've successfully authenticated with the principal " + key.Content + ", but Gitea does not provide shell access.")
^
cmd/serv.go:179:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there, " + user.Name + "! You've successfully authenticated with the key named " + key.Name + ", but Gitea does not provide shell access.")
^
cmd/serv.go:181:3: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("If this is unexpected, please log in with password and setup Gitea under another user.")
^
cmd/serv.go:196:5: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print(`{"type":"gitea","version":1}`)
^
tests/e2e/e2e_test.go:54:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error initializing test database: %v\n", err)
^
tests/e2e/e2e_test.go:63:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("util.RemoveAll: %v\n", err)
^
tests/e2e/e2e_test.go:67:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to remove repo indexer: %v\n", err)
^
tests/e2e/e2e_test.go:109:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stdout.String())
^
tests/e2e/e2e_test.go:110:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stderr.String())
^
tests/e2e/e2e_test.go:113:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stdout.String())
^
tests/integration/integration_test.go:124:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error initializing test database: %v\n", err)
^
tests/integration/integration_test.go:135:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("util.RemoveAll: %v\n", err)
^
tests/integration/integration_test.go:139:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to remove repo indexer: %v\n", err)
^
tests/integration/repo_test.go:357:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", resp.Body)
^
```
</details>
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Follow:
* #23574
* Remove all ".tooltip[data-content=...]"
Major changes:
* Remove "tooltip" class, use "[data-tooltip-content=...]" instead of
".tooltip[data-content=...]"
* Remove legacy `data-position`, it's dead code since last Fomantic
Tooltip -> Tippy Tooltip refactoring
* Rename reaction attribute from `data-content` to
`data-reaction-content`
* Add comments for some `data-content`: `{{/* used by the form */}}`
* Remove empty "ui" class
* Use "text color" for SVG icons (a few)
Change all license headers to comply with REUSE specification.
Fix#16132
Co-authored-by: flynnnnnnnnnn <flynnnnnnnnnn@github>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
This PR would presumably
Fix#20522Fix#18773Fix#19069Fix#21077Fix#13622
-----
1. Check whether unit type is currently enabled
2. Check if it _will_ be enabled via opt
3. Allow modification as necessary
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
The problem was that many PR review components loaded by `Show more`
received the same ID as previous batches, which confuses browsers (when
clicked). All such occurrences should now be fixed.
Additionally improved the background of the `viewed` checkbox.
Lastly, the `go-licenses.json` was automatically updated.
Fixes#21228.
Fixes#20681.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
